Canon LV-5210 Specyfikacja - Strona 9

Przeglądaj online lub pobierz pdf Specyfikacja dla Projektor Canon LV-5210. Canon LV-5210 22 stron. Mounting hanger for low ceilings
Również dla Canon LV-5210: Specyfikacja (47 strony), Broszura i specyfikacje (2 strony), (Japoński) Instrukcja montażu i instalacji (8 strony)

Drukuj stronę

Basic Serial Functional Specification for LV-5210/7215/7210

6.4 Operation Requirements

When the projector's status in this below, functional execution commands are limited.

Projector Status

Standby Mode

Processing Countdown

Processing Cooling Down

Abnormal Temperature Status

Processing Mode Change

Processing Power Save・Cooling

Down

Processing Power Save

Note) When the status is above, even if the projector receives other command in the above

status, the projector returns [ACK] [CR].

6.5 POWER ON COMMAND

COMMAND

"C00" [CR]

Note) When the status is above, even if the projector receives other command

Detail

in the above status, the projector returns [ACK] [CR].

Acceptable

Response

Unacceptable

6.6 POWER OFF COMMAND (QUICK Power OFF)

COMMAND

"C01" [CR]

Power OFF(Stand By)

When Power OFF with ON-OFF button of the projector or the remote

Detail

control, "Power OFF" will be displayed. However, as soon as this command

is sent, Quick Power OFF is executed.

Acceptable

Response

Unacceptable

6.7 POWER OFF COMMAND

COMMAND

"C02" [CR]

Power OFF(Stand By)

When Power OFF with ON-OFF button of the projector or the remote

Detail

control, "Power OFF" will be displayed. However, as soon as this command

is sent, Power OFF is executed.

Acceptable

Response

Unacceptable

Available Functional Execution Commands

C00:POWER ON Only

C00:POWER ON→Terminate processing Countdown

C01:POWER OFF

C02:POWER OFF→Terminate processing Countdown

NONE(does not execute even if receiving a command)

C00:POWER ON

C01:POWER OFF

Other Commands: POWER ON

[ACK] [CR]

"?" [CR]

[ACK] [CR]

"?" [CR]

[ACK] [CR]

"?" [CR]

Page