Canon LV-5210 사양 - 페이지 20

{카테고리_이름} Canon LV-5210에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-5210 47 페이지. Mounting hanger for low ceilings
Canon LV-5210에 대해서도 마찬가지입니다: 사양 (22 페이지), 브로셔 및 사양 (2 페이지), (일본어) 조립 및 설치 매뉴얼 (8 페이지)

페이지 인쇄
Canon LV-5210 사양
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.5.5

CF_V-POS COMMAND

COMMAND
"CF_V-POS_%1" [CR]
"0000-nnnn"-- Directly set Vertical Position
%1
"UP"---------------- Vertical Position setting value +1.
"DN"---------------- Vertical Position setting value-1
Set vertical position of PC signal. Only valid when it is in the usual Power
ON status.)
Details
projector. Therefore, when ALL OFF the projector, the value will return to
the original setting. (stays in STANDBYMODE)
Acceptable
Response
Unacceptable
8.5.6

CF_DDOTS COMMAND

COMMAND
"CF_DDOTS_%1" [CR]
"0100-nnnn"-- Directly set Display Dots value.
%1
"UP"---------------- Display Dots ＋1
"DN"---------------- Display Dots -1
et Display Dots of PC signal
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
Details
setting. (stay in STANDBYMODE.)
(stays in STANDBYMODE.)
（Only valid when it is in the usual Power ON status.)
Acceptable
Response
Unacceptable
8.5.7

CF_DLINECOMMAND

COMMAND
"CF_DLINE_%1" [CR]
"0100-nnnn"-- directly specify display Line value. "nnnn" means maximum.
%1
"UP"---------------- Display Line ＋1
"DN"---------------- Display Line -1
Set Display Line of PC signal（Only valid when it is in the usual Power ON
status.)
The value set by this Command will not be saved to the projector.
Details
Therefore, when ALL OFF the projector, the value will return to the original
setting. (stays in STANDBYMODE.)
(stays in STANDBYMODE.)
Acceptable
Response
Unacceptable
"nnnn" means maximum value.
This value is from current Total Line value – display
Line value.
The value set by this Command will not be saved to the
"000" [CR]
"101" [CR] ----Input-VIDEO
"nnnn" means maximum value.
This value is from current Total Dots value-Horizontal
position value
"000" [CR]
"101" [CR] ----Input-VIDEO
This value is from current Total Line value – Vertical
Position value.
"000" [CR]
"101" [CR] ----Input-VIDEO
Page
20