Canon LV-5210 사양 - 페이지 21
{카테고리_이름} Canon LV-5210에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-5210 47 페이지. Mounting hanger for low ceilings
Canon LV-5210에 대해서도 마찬가지입니다: 사양 (22 페이지), 브로셔 및 사양 (2 페이지), (일본어) 조립 및 설치 매뉴얼 (8 페이지)
페이지 인쇄
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.5.8
CF_PC STORECOMMAND
COMMAND
"CF_PCSTORE_%1" [CR]
"MODE1" --- Store current PC Adjust status to MODE 1
"MODE2" ...Store current PC Adjust status to MODE 2
%1
"MODE3" ...Store current PC Adjust status to MODE 3
"MODE4" ...Store current PC Adjust status to MODE 4
"MODE5" ...Store current PC Adjust status to MODE 5
Store current PC Adjust status (each parameter status such as Total dots) to
MODE1-5.
This command operates the same operation as storing to MODE1-MODE5 in
Details
（Only valid when it is in the usual Power ON status.)
Acceptable
Response
Unacceptable
8.5.9
CF_PC MODE FREECOMMAND
COMMAND
"CF_PCMODEFREE_%1" [CR]
"MODE1" ...reset MODE 1 to Free
"MODE2" ...reset MODE 2 o Free
%1
"MODE3" ...reset MODE 3 o Free
"MODE4" ...reset MODE 4 to Free
"MODE5" ...reset MODE 5 to Free
Reset MODE 1, 2, 3, 4, and 5 to Free.
Details
This command works as the same when resetting Modes in PC adjust menu.
(Only valid when it is in the usual Power ON status.)
Acceptable
Response
Unacceptable
8.6 VIDEO Control COMMAND
8.6.1
CF_AVDDOTS COMMAND
COMMAND
"CF_AVDDOTS_%1" [CR]
"UP"...........Current setting value +1
%1
"DN"............Current setting value -1
Set AV Service MODE Horizontal Resolution.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there e is no signal, the projector returns "101" [CR].
Acceptable
Response
Unacceptable
PC Adjust Menu.
"000" [CR]
"101" [CR] ----Input-VIDEO
"000" [CR]
"101" [CR] ----Input-VIDEO
"000" [CR]
"101" [CR] ----Input-VIDEO
Page
21