Canon LV-7215 사양 - 페이지 30
{카테고리_이름} Canon LV-7215에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7215 47 페이지. Mounting hanger for low ceilings
Canon LV-7215에 대해서도 마찬가지입니다: 사양 (22 페이지), 브로셔 및 사양 (2 페이지), (일본어) 조립 및 설치 매뉴얼 (8 페이지)
페이지 인쇄
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
Unacceptable
8.11.8 CF_ON-STACOMMAND
COMMAND
"CF_ON-STA_%1" [CR]
"ON"------ Select Power On Start
%1
"OFF"---- Cancel Power On Start
Set/Cancel Power ON Start. (Only valid when it is in the usual Power ON
status.)
Details
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable
Response
Unacceptable
8.11.9 CF_P-MANECOMMAND
COMMAND
"CF_P-MANE_%1" [CR]
"OFF"------------ Set Power management to ＯＦＦ
%1
"READY"-------- Set Power management to Ready
"SHUTDOWN"-- Set Power management to Shut Down
Set/Cancel Power management.(Only valid when it is in the usual Power ON
status.)
Details
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable
Response
Unacceptable
8.11.10 CF_P-MANETIMECOMMAND
COMMAND
"CF_P-MANETIME_%1" [CR]
"01"-"30"-- Directly set the time by the minute
%1
"UP"------------ Set the time 1 minute longer
"DN"------------ Set the time 1 minute shorter
Set Power management time. (Only valid when it is in the usual Power ON
status.)
Details
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable
Response
Unacceptable
8.11.11 CF_FANSPEEDCOMMAND
COMMAND
"CF_FANSPEED_%1" [CR]
"MAX"------Select maximum speed
%1
"NOR"------Select NORMAL speed
Change Fan Control speed.
Details
status.)
The value set is stored in EEPROM
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Only valid when it is in the usual Power ON
When ALL OFF the projector the
Page
30