Canon LV-7225 - LCD Multimedia Projector XGA 기능 사양 - 페이지 26

{카테고리_이름} Canon LV-7225 - LCD Multimedia Projector XGA에 대한 기능 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7225 - LCD Multimedia Projector XGA 42 페이지. Multimedia projectors
Canon LV-7225 - LCD Multimedia Projector XGA에 대해서도 마찬가지입니다: 기능 사양 (20 페이지), 사양 (6 페이지)

페이지 인쇄
Canon LV-7225 - LCD Multimedia Projector XGA 기능 사양
Expand Serial Command Functional Specification

8.11.9. CF_P-MANE Command

Command
"CF_P-MANE_%1" [CR]
" O F F " - - - - - - - - - - - - - - - Set Power Management to Off
%1
" R E A D Y " - - - - - - - - - - - Set Power Management to Ready
" S H U T D O W N " - - - - Set Power Management to Shut Down
Set / Cancel Power management. (Only valid when it is in the usual Power On
status)
Details
This setting status is stored in EEPROM, hold even if AC Power turning Off and
On.
Acceptable
Response
Unacceptable

8.11.10. CF_P-MANETIME Command

Command
"CF_P-MANETIME_%1" [CR]
"01" – "30" --------- Directly set the time by the minute
%1
"UP" ----------------- Set the time 1 minute longer
"DN" ----------------- Set the time 1 minute shorter
Set Power Management time. (Only valid when it is in the usual Power On
status)
Details
This setting status is stored in EEPROM, hold even if AC Power turning Off and
On.
Acceptable
Response
Unacceptable

8.11.11 CF_FANSPEED Command

Command
"CF_FANSPEED_%1" [CR]
"MAX" --------- Select Maximum speed
%1
"NOR" ---------- Select Normal speed
Change Fan Control speed. (Only valid when it is in the usual Power On status)
Details
This setting status is stored in EEPROM, hold even if AC Power turning Off and
On.
Acceptable
Response
Unacceptable

8.11.12. CF_KEYDIS Command

Command
"CF_KEYDIS_%1" [CR]
"NONE" ---------- RC and KEY are available
%1
"RC" --------------- Key lock RC
"KEY" ------------- Key lock Unit
Details
Set Key lock the RC / KEY. (Only valid when it is in the usual Power On status)
Acceptable
Response
Unacceptable

8.11.13. CF_TERMINAL Command

Command
"CF_TERMINAL_%1" [CR]
"COMPUTER" -------- Set Input mode
%1
"MONITOR" ----------- Set Monitor Output
Set Terminal. (Only valid when it is in the usual Power On status)
Details
In this model, Terminal is COMPTUER2.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Page 25 of 41