Canon LV-7297M 명령 사양 - 페이지 22
{카테고리_이름} Canon LV-7297M에 대한 명령 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7297M 26 페이지. Lv series multimedia lcd projectors
Canon LV-7297M에 대해서도 마찬가지입니다: 사양 (2 페이지)
페이지 인쇄
LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/
Status Read Command
7.1. Format
7.1.1.
PC issues commands in format as below;
"CR" Command [CR]
Command 1 character(See Basic Status Read Command Table)
7.1.2.
When a projector receives the appropriate command, it returns a character line as the
required data.
Required Data [CR]
Required Data A character line(See Basic Status Read Command Table)
7.1.3.
When the received data cannot be decoded, the projector returns "?" [CR].
7.2. Transfer Example
Get input mode for projector with basic commands
PC → Projector
Projector → PC
7.3. Operation Requirements
When Eco mode is selected in Standby mode of Setting menu and projector is in Standby, Status
Read Commands are invalid.
7.4. Status Read Command
Command
"CR0" [CR]
Detail
Get the projector's operating status
Acceptable
Response
Unacceptable
LV-8227M/ LV-7292S/LV-7297S/LV-7392S
Command(issues a command of getting current input mode)
"C" "R" "1" "CR"
"%1" [CR]
"00" = Power ON
"80" = Standby
"40" = Countdown in process
"20" = Cooling Down in process
"10" = Power Failure
"28" = Cooling Down in process due to Temperature Anomaly
%1
"88" = Coming back after Temperature Anomaly
"24" = Power Save/Cooling Down in process
"04" = Power Save
"21" = Cooling Down is in process after Power off due to lamp
failure
"81" = Standby after Cooling Down due to lamp failure
"?" [CR]
-19-
Basic Serial Command Specifications
"1"
Processing
Response
(A few ms 1s)
(
Shows Computer 1 is selected)
"CR"