Canon LV-7297M 명령 사양 - 페이지 26
{카테고리_이름} Canon LV-7297M에 대한 명령 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7297M 26 페이지. Lv series multimedia lcd projectors
Canon LV-7297M에 대해서도 마찬가지입니다: 사양 (2 페이지)
페이지 인쇄
LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/
Unacceptable
7.9. Lamp Mode Read Command
Command
"CR7" [CR]
Get lamp mode status.
Detail
For 1 lamp projector, get if it is lighting or not.
Acceptable
Response
Unacceptable
LV-8227M/ LV-7292S/LV-7297S/LV-7392S
%1 Temperature of sensor 1
%2 Temperature of sensor 2
%3 Temperature of sensor 3
Temperature data is shown as "00.0".
When the temperature goes down to -, the first character
%1
becomes "-" instead of a space, like "-05.5" [CR].
%2
When no temperature data can be returned due to hardware
%3
problems, the first character becomes "E" like"E00.0" [CR].
When several temperature sensors are equipped, Responses are
returned continuously.
"_31.5 _ _35.2 _ _33.4"[CR]
The first data is sensor 1, then one space, and the data of sensor
2 follows.
" "[CR]
"%1" [CR]
"00" [CR]=Light is out.
%1
"01" [CR]=Light is on.
" "[CR]
-23-
Basic Serial Command Specifications