Canon LV-7297M 명령 사양 - 페이지 25
{카테고리_이름} Canon LV-7297M에 대한 명령 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7297M 26 페이지. Lv series multimedia lcd projectors
Canon LV-7297M에 대해서도 마찬가지입니다: 사양 (2 페이지)
페이지 인쇄
LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/
7.5. Input Mode Read Command
Command
"CR1" [CR]
Detail
Get the selected Input No.
Acceptable
Response
Unacceptable
7.6. Lamp Time Read Command
Command
"CR3" [CR]
Get the total lamp running hours (Not actual lamp used hour, but Eco mode
Detail
corresponding value).
Acceptable
Response
Unacceptable
7.7. Setting Read Command
Command
"CR4" [CR]
Detail
Get screen setting status such as Ceiling / Rear.
Acceptable
Response
Unacceptable
7.8. Temp Read Command
Command
"CR6" [CR]
Get the temperature data inside the projector.
Detail
With some temperature sensors installed in the projector, it is possible to get all
the temperature at once.
Response
Acceptable
LV-8227M/ LV-7292S/LV-7297S/LV-7392S
"%1" [CR]
"1" = Computer is selected
"2" = HDMI is selected
"3" = Video is selected
%1
"1" = Computer is selected
"2" = Video is selected
"?" [CR]
"%1" [CR]
Shows the time period with 5 digits numbers.
%1
Example "00410"[CR]
"?" [CR]
"%1" [CR]
"11"[CR] = Normal Screen Setting
"10"[CR] = Picture is top/bottom reversed.
(Status: Rear Ceiling ON)
%1
"01"[CR] = Picture is left/right reversed. (Status: Rear ON)
"00"[CR] = Picture is top/bottom and left/right reversed.
(Status: Ceiling ON
"?" [CR]
"%1_%2_%3" [CR]
-22-
Basic Serial Command Specifications
shows 410 hours
)