Canon LV-8320 사양 - 페이지 6

{카테고리_이름} Canon LV-8320에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-8320 26 페이지. Lv series multimedia lcd projectors
Canon LV-8320에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄
Canon LV-8320 사양

3 Notes for Communication

1.
The projector control command is defined as one command/one line that starts with "C" and ends
with carriage return (0x0D).
2.
There are two types of Commands: Functional Execution Commands and Status Read
Commands.
Example of Functional Execution Command: "C05" [CR]
Example of Status Read Command: "CR0" [CR]
3.
When it takes more than one second to receive one command, it does not operate.
The information of buffer is cleared when it takes more than one second to receive carriage return
(0x0D) after the projector receives the first data "C".
4.
For Command pipelining, wait for the interval of 100ms after receiving a response.
PC → Projector
Projector → PC
3.4.1. When a command is issued before receiving a response, the function is not executed
properly.
3.4.2. Except for when there is no Response for more than 5 seconds.
5.
It takes about 5 seconds for internal initialization after plugging in AC power. During this time, it
cannot process commands. Do not issue any command.
6.
The number of characters of response to Status Read Commands depends on commands.
Please see [7. Status Read Commands].
7.
Characters for commands must be Capital (A - Z).
LV-8320 Basic Serial Command Specifications
Command
"C"
"0"
"7"
CR
(A few ms
-3-
More than 100ms
Next Command
CR
ACK
Response
5s)