CANOPY STAR CNP3-50 Series 설치 매뉴얼 - 페이지 4
{카테고리_이름} CANOPY STAR CNP3-50 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CANOPY STAR CNP3-50 Series 8 페이지.
페이지 인쇄INSTALLATION INSTRUCTIONS - DRIVER BOX
1.
Turn off main power.
2.
Secure driver box assembly to mounting bracket by tightening mounting screws using ¼" hex driver.
See Figure 9.
3.
Secure mounting bracket to any vertical wall using #10 sheet metal screws supplied. Insure location allows wire
harness to reach low voltage side of power supply box. See Figure 10.
4.
Make internal primary side (high voltage) power connections by connecting wires, Black to Load, White to Neu-
tral and Green to Ground using approved electrical connector. See wire diagrams.
5.
Make secondary (low voltage) connections by using approved electrical connector. See wire diagrams.
6.
Secure driver box top using #8 sealing machine screws supplied.
7.
Turn on power.
FIG 9
Mounting screws
US LED
| 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | [email protected] | www.usled.com
INSTALLATION GUIDE
FIG 10
CNPx-50
Page 4
#44-000017
Updated 04.20.18