CANOPY STAR CNP3-50 Series Руководство по установке - Страница 4
Просмотреть онлайн или скачать pdf Руководство по установке для Фонарь CANOPY STAR CNP3-50 Series. CANOPY STAR CNP3-50 Series 8 страниц.
Печатать страницуINSTALLATION INSTRUCTIONS - DRIVER BOX
1.
Turn off main power.
2.
Secure driver box assembly to mounting bracket by tightening mounting screws using ¼" hex driver.
See Figure 9.
3.
Secure mounting bracket to any vertical wall using #10 sheet metal screws supplied. Insure location allows wire
harness to reach low voltage side of power supply box. See Figure 10.
4.
Make internal primary side (high voltage) power connections by connecting wires, Black to Load, White to Neu-
tral and Green to Ground using approved electrical connector. See wire diagrams.
5.
Make secondary (low voltage) connections by using approved electrical connector. See wire diagrams.
6.
Secure driver box top using #8 sealing machine screws supplied.
7.
Turn on power.
FIG 9
Mounting screws
US LED
| 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | [email protected] | www.usled.com
INSTALLATION GUIDE
FIG 10
CNPx-50
Page 4
#44-000017
Updated 04.20.18