Bolt Cyclone X PP-600 사용자 설명서 - 페이지 9

{카테고리_이름} Bolt Cyclone X PP-600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bolt Cyclone X PP-600 20 페이지. For portable flashes

Connecting Your Bolt Cyclone X Power Pack to Your Flash

You can use the Cyclone X to power a wide range of flash units. To connect the Cyclone X to a flash unit,

you must use a compatible connection cable. Some cables sold by flash and power pack manufacturers are

interchangeable with Bolt cables, but other flash brands use a different connector type. Make sure you select

the right one for the flash being used.

Most compatible flash units require the standard batteries to be installed in the flash in order to power the

computer functions that allow the flash to work.

Important! Most compatible flash units require the standard batteries to be loaded before connecting

the unit to the Cyclone X. You may need to set your flash unit to recycle by drawing power only from

the Cyclone X to avoid draining the installed batteries. Check your flash unit's manual for details on the

relevant setting.

Connecting Your Cyclone X