Bolt Cyclone X PP-600 Kullanıcı Kılavuzu - Sayfa 9

Güç Paketi Bolt Cyclone X PP-600 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Bolt Cyclone X PP-600 20 sayfaları. For portable flashes

Sayfayı Yazdır

Connecting Your Bolt Cyclone X Power Pack to Your Flash

You can use the Cyclone X to power a wide range of flash units. To connect the Cyclone X to a flash unit,

you must use a compatible connection cable. Some cables sold by flash and power pack manufacturers are

interchangeable with Bolt cables, but other flash brands use a different connector type. Make sure you select

the right one for the flash being used.

Most compatible flash units require the standard batteries to be installed in the flash in order to power the

computer functions that allow the flash to work.

Important! Most compatible flash units require the standard batteries to be loaded before connecting

the unit to the Cyclone X. You may need to set your flash unit to recycle by drawing power only from

the Cyclone X to avoid draining the installed batteries. Check your flash unit's manual for details on the

relevant setting.

Connecting Your Cyclone X