Cantaloupe Radio BA32 Factory+ 소유자 매뉴얼 - 페이지 3

{카테고리_이름} Cantaloupe Radio BA32 Factory+에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cantaloupe Radio BA32 Factory+ 8 페이지. Bluetooth retrofit kit

OPERATION

The BA32 works similarly in all 3 radios it supports, but with

some slight differences. We'll first cover common functionality,

then cover radio-specific controls later.

AUDIO SOURCES

With the Factory+ kit installed, your radio has 3 possible audio

sources: tuner (AM, FM, etc.), Bluetooth, and a 3.5mm auxil-

iary input. Cycling through these sources will be covered later.

As a shorthand, the selected source may be referred to as the

"mode" throughout this manual (ex. "Bluetooth mode" meaning

Bluetooth source is selected).

The current source can be seen from the radio's LCD display.

In Bluetooth mode, the MTL indicator will be either blinking or

solid. In aux mode, the indicator will be off, and in tuner mode,

the display will show the current station as normal.

Factory+ kits don't require any special "pairing" mode to enter

before connecting a mobile device. Instead, the kit is always

ready to connect whenever a device is not already connected.

This ready-to-connect state is indicated by MTL blinking while

in Bluetooth mode. To connect, open your device's Bluetooth

settings and connect to "Cantaloupe Radio BA32". Once con-

nected, MTL will remain on.

DISCONNECT & RECONNECT

In Bluetooth mode, a long press (>1sec) on the volume knob

triggers one of two actions: if a device is connected, it will be

disconnected; if no device is connected, the radio will attempt

to reconnect a previously-connected device. Note this happens

automatically when the radio is powered on.

DASHBOARD DESKTOP APPLICATION

Our desktop application, Dashboard, helps you get the most

out of your Factory+ kit. With Dashboard, you can:

•

Customize device settings not available elsewhere

•

Update firmware for new features and improvements

•

Submit diagnostics if you encounter an issue

•

Reset your Factory+ kit

Dashboard is available for Mac and

Windows platforms. Scan the QR to the

right for more info.