CANTERBURY Nicolazzi Z1458WS 매뉴얼 - 페이지 3
{카테고리_이름} CANTERBURY Nicolazzi Z1458WS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CANTERBURY Nicolazzi Z1458WS 14 페이지. 3 hole bridge sink mixer with side spray
페이지 인쇄Installation Instructions
Preparation
❶
Flush out the pipework to remove any foreign matter.
The hot supply should be on the left when viewed from
the front of the fitting.
Measure and cut tap hole spacing of 101 mm, centre to
centre on the wash basin. Three holes are required for
the tap set.
❷
Tap cut out hole sizes : Maximum 32mm diameter.
Under side clearance : Maximum 90mm
❸
Insert the tap B, into work top mounting
holes.
Insure o-ring A, is located between tap base
and worktop surface.
Further information Phone (03) 9761 4603
3
Model : Z1458WS
Continue.......