CANTERBURY Nicolazzi Z1458WS 매뉴얼 - 페이지 4

{카테고리_이름} CANTERBURY Nicolazzi Z1458WS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CANTERBURY Nicolazzi Z1458WS 14 페이지. 3 hole bridge sink mixer with side spray

페이지 인쇄

Installation Instructions

❹



Under the sink, place the supplied rubber gaskets

C, onto the tap thread extensions. Then screw the

mounting nuts D, onto the thread extensions.

Screw the mounting nuts until the rubber gaskets

mate up with the underside of the sink.

❺



Tighten each nut using a suitable size spanner or

smooth jaw shifter.

Note: The under deck mounting surface must be flat. If

the mounting surface is irregular, the nut may not be

secured, and the tap will be loose on the sink.

Hand Spray Preparation

❻



Measure and cut Hand sprayer hole, with a

minimum hole spacing of 120mm from tap body

centre line to Hand spray centre line. Hand spray

maximum distance should be 250mm from the tap

body centre line to centre line of the Hand spray.

Note: make sure the hand spray hole is positioned a

minimum of 120mm away from the main body of the

tap. ( Min. Centre to Centre hole distance of 120mm)

See our video : https://youtu.be/00TOv-nmFzY

Further information Phone (03) 9761 4603

Model : Z1458WS

[email protected]