Asus BA5120 설치 매뉴얼 - 페이지 30

{카테고리_이름} Asus BA5120에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus BA5120 42 페이지. Pc system

To install an IDE hard disk drive:

Follow steps 1-7 of the previous section.

Connect the blue interface of the IDE ribbon cable to the primary IDE

connector (blue connector labeled PRI_IDE) on the motherboard.

•

Connect the gray interface of the IDE ribbon cable to the IDE connector on

the drive.

If you install two IDE hard disk drives, connect the black interface of the IDE

ribbon cable to the IDE connector on the second (Slave) IDE hard disk drive.

Connect a 4-pin power plug from the power supply unit to the power

connector at the back of the drive(s).

2-16

IDE ribbon cable

If you will install only one hard disk drive, make sure to configure your hard

disk drive as Master device before connecting the IDE cable and power

plug. Refer to the HDD documentation on how to set the drive as a Master

device.

If you will install two IDE hard disk drives, configure the other device as

Slave.

Power cable

Chapter 2: Basic installation