Dot Origin VTAP100 설치 매뉴얼 - 페이지 4

{카테고리_이름} Dot Origin VTAP100에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dot Origin VTAP100 17 페이지. Desktop usb reader
Dot Origin VTAP100에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지), 설치 매뉴얼 (16 페이지)

페이지 인쇄

Safety instructions

WARNING: INTENDED USE

The VTAP100 equipment is intended for use by suitably qualified integrators, who will

integrate the VTAP100 OEM module (PCB) into their own hardware, without any changes or

modifications to the VTAP100 OEM module device. (An optional enclosure can be supplied.)

Components mounted on the VTAP100 PCB are not user-serviceable. Product safety has

been tested to comply with IEC 62368-1.

WARNING: ESD PRECAUTIONS

We recommend careful handling and storage of Electrostatic Sensitive Devices (ESDs) during

installation. The VTAP100 OEM module PCB should always be protected by static shielding

bags for shipping or storage.

WARNING: POWER SUPPLY

Use either a MicroUSB to USB cable, or the optional captive cable, if any, to connect the

VTAP100 OEM module PCB to a PC. (Never connect both at the same time).

EMC emissions and immunity certifications are only valid when using the VTAP100 OEM

module with the supplied cable.

VTAP100 OEM MODULE

INSTALLATION GUIDE

VTAP MOBILE WALLET READERS

PAGE II