Dot Origin VTAP100 Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt sieciowy Dot Origin VTAP100. Dot Origin VTAP100 17 stron. Desktop usb reader
Również dla Dot Origin VTAP100: Instrukcja instalacji (13 strony), Instrukcja instalacji (16 strony)
Drukuj stronęSafety instructions
WARNING: INTENDED USE
The VTAP100 equipment is intended for use by suitably qualified integrators, who will
integrate the VTAP100 OEM module (PCB) into their own hardware, without any changes or
modifications to the VTAP100 OEM module device. (An optional enclosure can be supplied.)
Components mounted on the VTAP100 PCB are not user-serviceable. Product safety has
been tested to comply with IEC 62368-1.
WARNING: ESD PRECAUTIONS
We recommend careful handling and storage of Electrostatic Sensitive Devices (ESDs) during
installation. The VTAP100 OEM module PCB should always be protected by static shielding
bags for shipping or storage.
WARNING: POWER SUPPLY
Use either a MicroUSB to USB cable, or the optional captive cable, if any, to connect the
VTAP100 OEM module PCB to a PC. (Never connect both at the same time).
EMC emissions and immunity certifications are only valid when using the VTAP100 OEM
module with the supplied cable.
VTAP100 OEM MODULE
INSTALLATION GUIDE
© DOT ORIGIN
VTAP MOBILE WALLET READERS
PAGE II