Dot-Spot brilliance RGB 운영자 매뉴얼 - 페이지 11

{카테고리_이름} Dot-Spot brilliance RGB에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dot-Spot brilliance RGB 20 페이지. Recessed luminaire

Thank you / contents / intended use / installation

Thank you very much!

We are pleased that you decided to buy the dot-spot brilliance recessed luminaire!

dot-spot products are developed and manufactured according to very high quality guide-

lines. The high quality and long life of the products is an active contribution to resource

conservation and environmental protection.

The dot-spot brilliance is a compact recessed luminaire with a pivotable and turnable

10 W LED illuminant. The housing is entirely made of corrosion-resistant V4A stainless

steel. The ball mechanism guarantees an optimum heat transport from the LED towards

the floor housing. The integrated drive electronics has a temperature control which

reduces the power of the LED in the event of a risk of overheating.

At first, check the package contents

■ Brilliance recessed luminaire with clamping springs and pivotable LED illuminant

■ Floor sleeve

Intended use

The brilliance recessed luminaire serves for illuminating walls, faces, plants and such-

like from the ground as well as for creating light accents.

Following correct installation, the brilliance recessed luminaire is waterproof and insen-

nstallation, the brilliance recessed luminaire is waterproof and insen-

sitive against common weather and environmental influences.

In order to operate the brilliance recessed luminaire, depending on the number of

connected spots, a 24 V DC (12 V DC for the RGB version) power adapter with sufficient

output power is necessary. The recessed luminaire brilliance can be directly installed

in solid materials such as wood or stone, without using any floor sleeve. In case of an

installation in loose materials or concrete, we recommend using a floor sleeve.

In order to achieve a better illumination and to reduce the blinding effect, the illuminant

can be pivoted by up to 25 degrees and turned by 360 degrees.

Installation

During installation, the relative safety regulations have to be followed. The installation

may only be carried out by appropriately trained professionals.