DAGE-MTI CCD-100 사용자 설명서 - 페이지 5

{카테고리_이름} DAGE-MTI CCD-100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAGE-MTI CCD-100 17 페이지. Camera system

페이지 인쇄

1. Operation

The

CCD-100

InvestiGater or independently. Figure 1 shows the

independently. Attach the power supply to the

connector on the

BNC is available for viewing with a monitor.

Figure 2 shows the

remote control. The

now made at the

, connect the

GATE

Figure 3 shows the

InvestiGater. A standard S-video cable, Dage P/N 737980-

01, provides video and the gate pulse between the InvestI-

Gater and the

provides power for both the

therefore do not use the

video of the Dage InvestiGater is available for viewing with

a monitor or for digitization by a computer.

A lens or microscope can be attached to the front of the

. The camera is supplied with a removable C-mount

CCD-100

adapter. If a CS lens is to be used, the C-mount adapter

should be removed. Be sure not to remove the C-mount

adapter when unscrewing a lens or microscope from the

camera. The camera has an adjustable back focus that can be

changed through the use of a flat bladed screwdriver. The

adjustment is located on the top of the camera at the front.

Simply use the screwdriver to provide the correct back focus.

To achieve a picture, place the camera in the

and

BLACK

AUTO GAIN

camera will be able to provide an acceptable image regardless

of light level.

can function in tandem with the Dage

. Video output from the

CCD-100

POWER

and two cables,

RC-100

CCD-100

. The InvestiGater's power supply

CCD-100

positions. This will ensure that the

with the optional

and

VIDEO

to the

CCD-100

connected with the Dage

and the InvestiGater,

CCD-100L

's power supply. The output

CCD-100

POWER

VIDEO

RC-100

interconnects are

and

REMOTE

AUTO