DAGE-MTI CCD-100 사용자 설명서 - 페이지 6
{카테고리_이름} DAGE-MTI CCD-100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAGE-MTI CCD-100 17 페이지. Camera system
페이지 인쇄Operation
POWER
The green LED located at the bottom of the rear panel
between the
GAM
power is supplied to the camera either through the
or
GATE,
REMOTE
approximately 200mA with a voltage of +10.5VDC to
+18VDC. The external power supply, Dage P/N 738044-02,
provides the correct power to the camera.
VIDEO
The BNC video connector provides a 1Vp-p composite
video signal into a 75Ω termination. The output video of the
camera is also available at the
connector is being utilized, be sure not the double terminate
the video by also using the
Figure 4: CCD-100 Rear Panel
switch and the
connectors. The camera requires
switch lights when
POL
connector. If the
GATE
connector.
VIDEO
POWER,
GATE