DAGU Playful Puppy 사용자 설명서 - 페이지 2

{카테고리_이름} DAGU Playful Puppy에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAGU Playful Puppy 15 페이지. Quadruped robot kit

There are 8 identical leg segments included in the kit. Select 4 of them and attach foam rubber feet

using the 3 x 12mm panhead screws. There are only 4 of these screws and they are the largest so they

are easy to find.

NOTE:

Self tapping screws have a course thread and tapered tip that can drill into soft materials like plastic and

wood.

Pan head screws have an extra large head. This is the equivalent of using a seperate washer and screw.

The pan head screws in this kit are also self tapping screws.

Machine screws have a fine thread and are designed to screw into machined parts where a thread is

already present.

Step 3. Mount knee servos to legs

Mount 4 of your servos on the leg segments with the foam rubber feet. Use 2.3 x 8mm self tapping

screws.

Make sure the output shaft is away from the foot as shown in the photo.

Step 4. Mount servo horns on the thigh segments

A servo horn is a piece of plastic that fits onto the output shaft of the servo and allows you to attach