DoubleSight DoubleSight DS-263N 사용자 설명서 - 페이지 6

{카테고리_이름} DoubleSight DoubleSight DS-263N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DoubleSight DoubleSight DS-263N 11 페이지. Doublesight displays lcd monitor user's manual

페이지 인쇄

Display Controls

Function Description

Figure

(D-SUB or DVI-I

AUTO ADJUST

(D-SUB or DVI-I

Function

Function Description

The following DV mode display setting can be selected by

DV MODE

OSD (STANDARD/TEXT/sRGB/MOVIE/GAMING/PHOTO)

Default setting: TEXT

Adjust the brightness.

BRIGHTNESS

Factory setting: 100.0%

Adjust the image contrast.

CONTRAST

Factory setting:50.0%

Adjust the sharpness.

SHARPNESS

Factory setting: 50%

AUTO

CONTRAST

Adjust the CONTRAST to the optimal value for the

video-input level automatically.

Analog signal

Only)

Adjust the H.POSITION, V.POSITION, H-SIZE and FINE to

Analog Input

the optimal value automatically.

Only)

This function allows you to choose from di erent display

modes:

Full: expands all resolution to full screen.

EXPANSION

Aspect: enlarges native resolution to either horizontal or

MODE

vertical limit.

Real: displays native resolution.

Default setting: FULL

LEFT/RIGHT

Adjust the horizontal image position.

Analog Input

Only)

DOWN/UP

Adjust the vertical image position.

Analog Input

Only)

CLOCK

Adjust the sync frequency of internal pixel clock.

Analog Input

Only)

PHASE

Adjust the value for improve display focus.

Analog Input

Only)

Display Controls

Function Description

Choose di erent color temperature

(9300K, 7500K, sRGB, USER).

Color

Temperature

Default is USER.

USER mode adjustable.

Adjust the contrast and brightness of each color of the

white balance.

RED

GREEN

Allows you to adjust the Red/Green/Blue color gain.

BLUE

GAIN

RED

GREEN

Allows you to adjust the Red/Green/Blue color o set.

BLUE

OFFSET

Adjust color depth, increasing this value makes pictures

more colorful, decreasing makes pictures less colorful.

SATURATION

Adjustable value from -100 to 100.

Factory setting: 0

DDC/CI allows you to control certain settings of the

monitor via computer.

DDC/CI

Default is ON.

When "Full" is not selected in the "Expansion Mode" and

the resolution is under the LCD panel's native resolution,

the picture does not display at full screen. The

borders/sides around the picture can be customized.

SIDE COLOR

Adjust "Side Color" to customize the color of the

border/sides around the picture.

Reset all user settings to factory preset value except

RECALL

language selection.

LANGUAGE

Select a language for OSD menu.

OSD

Control the location of the OSD menu on the screen.

LEFT/RIGHT

Factory setting: Center of the screen.

OSD UP/DOWN

Select OSD Menu turn o time.

OSD TURN OFF

Factory setting: 45 seconds.