DoubleSight DoubleSight DS-263N Kullanıcı Kılavuzu - Sayfa 6
Monitör DoubleSight DoubleSight DS-263N için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DoubleSight DoubleSight DS-263N 11 sayfaları. Doublesight displays lcd monitor user's manual
Sayfayı Yazdır
Display Controls
Function Description
Figure
(D-SUB or DVI-I
AUTO ADJUST
(D-SUB or DVI-I
(D-SUB or DVI-I
(D-SUB or DVI-I
(D-SUB or DVI-I
(D-SUB or DVI-I
8
Function
Function Description
The following DV mode display setting can be selected by
DV MODE
OSD (STANDARD/TEXT/sRGB/MOVIE/GAMING/PHOTO)
Default setting: TEXT
Adjust the brightness.
BRIGHTNESS
Factory setting: 100.0%
Adjust the image contrast.
CONTRAST
Factory setting:50.0%
Adjust the sharpness.
SHARPNESS
Factory setting: 50%
AUTO
CONTRAST
Adjust the CONTRAST to the optimal value for the
video-input level automatically.
Analog signal
Only)
Adjust the H.POSITION, V.POSITION, H-SIZE and FINE to
Analog Input
the optimal value automatically.
Only)
This function allows you to choose from di erent display
modes:
Full: expands all resolution to full screen.
EXPANSION
Aspect: enlarges native resolution to either horizontal or
MODE
vertical limit.
Real: displays native resolution.
Default setting: FULL
LEFT/RIGHT
Adjust the horizontal image position.
Analog Input
Only)
DOWN/UP
Adjust the vertical image position.
Analog Input
Only)
CLOCK
Adjust the sync frequency of internal pixel clock.
Analog Input
Only)
PHASE
Adjust the value for improve display focus.
Analog Input
Only)
Display Controls
Function Description
Choose di erent color temperature
(9300K, 7500K, sRGB, USER).
Color
Temperature
Default is USER.
USER mode adjustable.
Adjust the contrast and brightness of each color of the
white balance.
RED
GREEN
Allows you to adjust the Red/Green/Blue color gain.
BLUE
GAIN
RED
GREEN
Allows you to adjust the Red/Green/Blue color o set.
BLUE
OFFSET
Adjust color depth, increasing this value makes pictures
more colorful, decreasing makes pictures less colorful.
SATURATION
Adjustable value from -100 to 100.
Factory setting: 0
DDC/CI allows you to control certain settings of the
monitor via computer.
DDC/CI
Default is ON.
When "Full" is not selected in the "Expansion Mode" and
the resolution is under the LCD panel's native resolution,
the picture does not display at full screen. The
borders/sides around the picture can be customized.
SIDE COLOR
Adjust "Side Color" to customize the color of the
border/sides around the picture.
Reset all user settings to factory preset value except
RECALL
language selection.
LANGUAGE
Select a language for OSD menu.
OSD
Control the location of the OSD menu on the screen.
LEFT/RIGHT
Factory setting: Center of the screen.
OSD UP/DOWN
Select OSD Menu turn o time.
OSD TURN OFF
Factory setting: 45 seconds.
9