Doug Fleenor Design NODE2 매뉴얼 - 페이지 10

{카테고리_이름} Doug Fleenor Design NODE2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doug Fleenor Design NODE2 10 페이지. Two port ethernet to dmx512 interface

Restoring default settings

To set N

2 to its default configuration settings:

ODE

– Remove power from the N

– Remove jumper JP4

– Re-apply power, wait about 10 seconds

– Remove power from the N

– Re-install jumper JP4

– Re-apply power

The N

2 will have DHCP enabled and the IP address will be the default as shown on the

ODE

label on the back of the unit.

Factory default configures N

port direction must be changed using the built-in web server.

A utility program called Node Discovery, along with instructions, is available at

http://www.dfd.com/NodeDisc.html. This Windows program assists in finding and configuring

2s across a network.

ODE

Products manufactured by Doug Fleenor Design (DFD) carry a five-year parts and labor

warranty against manufacturing defects. It is the customer's responsibility to return the product

to DFD at the customer's expense. If covered under warranty, DFD will repair the unit and pay

for return ground shipping. If a trip is necessary to the customer's site to solve a problem, the

expenses of the trip must be paid by the customer.

This warranty covers manufacturing defects. It does not cover damage due to abuse, misuse,

negligence, accident, alteration, or repair by other than by Doug Fleenor Design.

Most non-warranty repairs are made for a fixed $50.00 fee, plus shipping.

Doug Fleenor Design, Inc.

396 Corbett Canyon Road

Arroyo Grande, CA 93420

(805) 481-9599 voice and FAX

(888) 4-DMX512 toll free (888) 436-9512

web site: http://www.dfd.com

ODE

2 as two DMX512 output ports. If a unit has input port(s), the

ODE

Page 10 of 10