Doug Fleenor Design NODE2 Руководство - Страница 10

Просмотреть онлайн или скачать pdf Руководство для Оборудование для звукозаписи Doug Fleenor Design NODE2. Doug Fleenor Design NODE2 10 страниц. Two port ethernet to dmx512 interface

Печатать страницу
Doug Fleenor Design NODE2 Руководство

Restoring default settings

To set N
2 to its default configuration settings:
ODE
– Remove power from the N
– Remove jumper JP4
– Re-apply power, wait about 10 seconds
– Remove power from the N
– Re-install jumper JP4
– Re-apply power
The N
2 will have DHCP enabled and the IP address will be the default as shown on the
ODE
label on the back of the unit.
Factory default configures N
port direction must be changed using the built-in web server.

Node Discovery

A utility program called Node Discovery, along with instructions, is available at
http://www.dfd.com/NodeDisc.html. This Windows program assists in finding and configuring
N
2s across a network.
ODE

Limited Manufacturer's Warranty

Products manufactured by Doug Fleenor Design (DFD) carry a five-year parts and labor
warranty against manufacturing defects. It is the customer's responsibility to return the product
to DFD at the customer's expense. If covered under warranty, DFD will repair the unit and pay
for return ground shipping. If a trip is necessary to the customer's site to solve a problem, the
expenses of the trip must be paid by the customer.
This warranty covers manufacturing defects. It does not cover damage due to abuse, misuse,
negligence, accident, alteration, or repair by other than by Doug Fleenor Design.
Most non-warranty repairs are made for a fixed $50.00 fee, plus shipping.
Doug Fleenor Design, Inc.
396 Corbett Canyon Road
Arroyo Grande, CA 93420
(805) 481-9599 voice and FAX
(888) 4-DMX512 toll free (888) 436-9512
web site: http://www.dfd.com
m
2
ODE
2
ODE
2 as two DMX512 output ports. If a unit has input port(s), the
ODE
Page 10 of 10