Doug Fleenor Design E2E 구성 매뉴얼 - 페이지 5

{카테고리_이름} Doug Fleenor Design E2E에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doug Fleenor Design E2E 8 페이지. Ethernet to ethernet protocol converter

Virtual Ports

The E2E communicates between its two Ethernet interfaces using virtual Ports. The four virtual

Ports are always connected by letter. This means Port A on the E2E in side will communicate

universe data to Port A on the E2E out side. These virtual connections remain linked at all times

for each of the four ports. The configuration for universe number and other protocol specific

details are configurable on the web server. The direction of the virtual port is not configurable.

The Ethernet in side will have a virtual port set to an output, which then feeds to the Ethernet

out side's virtual input.

Figure 2: An E2E's virtual Port A configuration for sACN in and ArtNet out

Page 5 of 8