Com DCD13019 지침 책자 - 페이지 4

{카테고리_이름} Com DCD13019에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Com DCD13019 8 페이지. Articulating tv wall mount for 19" to 80" flat panel tvs

PLEASE CHOOSE BEST INSTALLATION OPTION BASED ON TV BACK PANEL HOLE SPACING:

OPTION 1:

2.95 in x 2.95 in / 75 mm x 75 mm or 3.94 in x 3.94 in / 100 mm x 100 mm

Remove TV mounting plate (B) from wall

bracket (A).

Attach TV mounting plate (B) to the back of

the TV, by selecting mounting hardware

and then using instructions on page 5.

This mount is designed to be attached into wood

studs. DO NOT use wall anchors.

pencil, mark the hole locations at the desired height,

making sure you are level. Use wall bracket (A) as a

template to mark the two remaining holes. Drill pilot

holes at 4 pencil marks 2.5 in. (64mm) deep, using a

3/16 in. or 5 mm diameter drill bit.

Attach wall bracket (A) to the wall with 4 washers and

screws (F).

We strongly recommend two people, one on each side,

hold the TV. Carefully position the TV over the wall

bracket (A) until it locks in place. Tighten safety screws.

Using a stud