Com DCD13019 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stojaki i stojaki Com DCD13019. Com DCD13019 8 stron. Articulating tv wall mount for 19" to 80" flat panel tvs

Drukuj stronę

PLEASE CHOOSE BEST INSTALLATION OPTION BASED ON TV BACK PANEL HOLE SPACING:

OPTION 1:

2.95 in x 2.95 in / 75 mm x 75 mm or 3.94 in x 3.94 in / 100 mm x 100 mm

Remove TV mounting plate (B) from wall

bracket (A).

Attach TV mounting plate (B) to the back of

the TV, by selecting mounting hardware

and then using instructions on page 5.

This mount is designed to be attached into wood

studs. DO NOT use wall anchors.

pencil, mark the hole locations at the desired height,

making sure you are level. Use wall bracket (A) as a

template to mark the two remaining holes. Drill pilot

holes at 4 pencil marks 2.5 in. (64mm) deep, using a

3/16 in. or 5 mm diameter drill bit.

Attach wall bracket (A) to the wall with 4 washers and

screws (F).

We strongly recommend two people, one on each side,

hold the TV. Carefully position the TV over the wall

bracket (A) until it locks in place. Tighten safety screws.

Using a stud