dough Xpress D-TXA-2-18W 소유자 매뉴얼 - 페이지 16
{카테고리_이름} dough Xpress D-TXA-2-18W에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dough Xpress D-TXA-2-18W 20 페이지. Commercial grade dough press
페이지 인쇄
LEVELING INSTRUCTIONS
Tools Required:
• 5/16" Hex Wrench
• 3/8" Socket Drive Ratchet
• 5/8" Socket, Flat Blade Screwdriver
1.
Remove the existing four hole plugs using a flat blade screw driver. Be careful
not to scratch the surface of the platen mount during plug removal. The caps
will be reinstalled after the leveling adjustment is complete.
2.
Lower the Top Platen until one side touches to determine which side will be
adjusted. In the picture below, the front of the platen could be raised or the
back could be lowered.
16