dough Xpress D-TXA-2-18W Instrukcja obsługi - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Komercyjny sprzęt spożywczy dough Xpress D-TXA-2-18W. dough Xpress D-TXA-2-18W 20 stron. Commercial grade dough press
Drukuj stronę
LEVELING INSTRUCTIONS
Tools Required:
• 5/16" Hex Wrench
• 3/8" Socket Drive Ratchet
• 5/8" Socket, Flat Blade Screwdriver
1.
Remove the existing four hole plugs using a flat blade screw driver. Be careful
not to scratch the surface of the platen mount during plug removal. The caps
will be reinstalled after the leveling adjustment is complete.
2.
Lower the Top Platen until one side touches to determine which side will be
adjusted. In the picture below, the front of the platen could be raised or the
back could be lowered.
16