dough Xpress D-TXM-2-18-W 소유자 매뉴얼 - 페이지 17
{카테고리_이름} dough Xpress D-TXM-2-18-W에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dough Xpress D-TXM-2-18-W 20 페이지. Commercial grade dough press
페이지 인쇄
3.
On the chosen adjustment side (which is the front in this example), loosen the
front hex set screws using a 5/16" hex wrench. Note: When adjusting always
loosen at least 2 hex screws adjacent to each other.
4.
Adjust the front height of the upper platen up by turning the adjustment nut
counter counter clockwise. Turning the adjustment nut clockwise will lower
the front of the platen. Adjust in 180 degree increments, alternating between
the two nuts being adjusted.
LEVELING INSTRUCTIONS
17