dough Xpress D-TXM-2-18-W Owner's Manual - Page 17
Browse online or download pdf Owner's Manual for Commercial Food Equipment dough Xpress D-TXM-2-18-W. dough Xpress D-TXM-2-18-W 20 pages. Commercial grade dough press
Print Page
3.
On the chosen adjustment side (which is the front in this example), loosen the
front hex set screws using a 5/16" hex wrench. Note: When adjusting always
loosen at least 2 hex screws adjacent to each other.
4.
Adjust the front height of the upper platen up by turning the adjustment nut
counter counter clockwise. Turning the adjustment nut clockwise will lower
the front of the platen. Adjust in 180 degree increments, alternating between
the two nuts being adjusted.
LEVELING INSTRUCTIONS
17