Asus GigaX 1016D 빠른 설치 매뉴얼 - 페이지 3

{카테고리_이름} Asus GigaX 1016D에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus GigaX 1016D 4 페이지. Desktop fast ethernet switch

Rear panel

Place the switch on a flat surface that can support the weight of the switch and its

accessories. Make sure the surface meets the operating environment specifications.

NOTE: The length of the UTP Category 5 cable should not exceed 100 meters.

To connect network devices to the GigaX 1016D switch.

1. Connect one end of the Ethernet cable to an Ethernet port on the back of

the switch. Connect the other end to the Ethernet port on the network

device. Repeat this step to connect additional network devices.

Note:Use Category 5 Ethernet straight-through cables to ensure proper connection between

the switch and the other network devices.

Note: The Ethernet ports on the switch may be used as uplink ports to other switches, hubs,

bridges, or repeater. The switch is capable of detecting and adjusting either cross-over or

straight-through cables.

2. Plug the AC adaptor to an electrical outlet, then plug the other end to the

power connector on the back of the switch.

3. The power indicator and active port indicators will light up indicating

that the device is turned ON and in use.

RJ-45 Ethernet

Connectors

ASUS GigaX 1016D

AC IN

AC Power Input