Baumer AMG11 N29 매뉴얼 - 페이지 13

{카테고리_이름} Baumer AMG11 N29에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer AMG11 N29 41 페이지. Absolute encoders with profinet interface

4.4. Realtime Class Selection

The encoder supports the three PROFINET real time classes Realtime (RT), Isochronous Realtime (IRT)

Class2 and Class3. Which real time class is used best, depends on the demands of your application and thus

on the controller used (i.e. on the PLC).

4.4.1.

The Domain-Management determines the PROFINET bus properties.

Enter the Domain-Management by right-clicking the PROFINET bus rail in the Hardware window of Step7

software.

The screen shot below shows the name of the sync domain and the currently selected send clock. The send

clock is common to the controller and all devices who are members of this sync domain. It is one of the key

factors for overall performance of the PROFINET System.

Baumer_BUDE-PROFINET_MA_EN.docx

14.06.2016 / bja

13/41