Asus RT-G32 - Wireless Router 사용자 설명서 - 페이지 11

{카테고리_이름} Asus RT-G32 - Wireless Router에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus RT-G32 - Wireless Router 26 페이지. Broad range wireless family router
Asus RT-G32 - Wireless Router에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (13 페이지)

페이지 인쇄

Time of Day to Enable Radio: This field defines the time interval that wireless function is

enabled.

Data Rate (Mbps): This field allows you to select the transmission rate. [Auto] is

recommended to maximize performance.

Fragmentation Threshold: Fragmentation Threshold sets the frame size of incoming

messages (ranging from 256 to 2346 bytes) used as fragmentation boundary. If the frame size

is too big, the heavy interference affects transmission reliability. If the frame size is too small, it

decreases transmission efficiency.

RTS Threshold: Lower the signal RTS (Request To Send) to promote the transmission

efficiency in condition of noisy environment or too many clients.

DTIM Interval: DTIM (Delivery Traffic Indication Message) is included in Beacon packet. The

DTIM Interval (1-255) means the period of time to wake up wireless clients from Sleep Mode.

The default value is 1.

Beacon Interval: Beacon Interval means the period of time between one beacon and the next

one. The default value is 100 (the unit is millisecond, or 1/1000 second). Lower the Beacon

Interval to improve transmission performance in unstable environment or for roaming clients,

but it will be power consuming.

LAN

Configure LAN, DHCP, and Route settings.

LAN IP

Configure the LAN IP of RT-G32. The DHCP Server dynamically changes the IP pool when

you change the LAN IP.

IP Address: The LAN IP address of RT-G32. The Default value is 192.168.1.1.

Subnet Mask: The LAN subnet mask of RT-G32. The Default value is 255.255.255.0