Douglas Dynamics SnowEx HDV 77780 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Douglas Dynamics SnowEx HDV 77780에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Douglas Dynamics SnowEx HDV 77780 16 페이지. Snowplow

UNPACKING AND REMOVING SHIPPING

BRACKETS

1. Set aside the blade guides and parts bags. The

vehicle electrical harnesses and Owner's Manual

packet are in the bag with the headlamp box.

Move the attach/detach lever to unpin the

receivers and set aside.

NOTE: Leave handle in the detach position during

entire assembly process.

2. Remove the lag screws and wood blocks securing

the headlamp channel to the headgear and set the

headlamp channel aside.

3. Remove the packaging hardware securing the

headgear to the T‑frame, except for the clevis pins

and the shipping brackets.

4. Remove the fasteners and blocking securing the

T‑frame to the pallet.

5. While supporting the headgear, remove and retain

the clevis pins and discard the shipping brackets

and hairpin cotters.

Remove and retain

clevis pins (both sides).

Lit. No. 52592, Rev. 04

INSTALLATION INSTRUCTIONS

Remove and discard

shipping brackets

(both sides).

Remove and discard the shipping brackets and

the two cap screws and locknuts from the lift

cylinder.

Remove and discard

shipping brackets

(both sides).

July 15, 2020