Douglas Dynamics SnowEx Automatixx SPEEDWING 77840-1 설치 지침 매뉴얼 - 페이지 7
{카테고리_이름} Douglas Dynamics SnowEx Automatixx SPEEDWING 77840-1에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Douglas Dynamics SnowEx Automatixx SPEEDWING 77840-1 17 페이지.
페이지 인쇄
A-FRAME TO BLADE ASSEMBLY
1. Align the pivot bolt hole on the A-frame with the
pivot bolt hole on the quadrant.
2. Install the pivot bolt from the top. Secure with a
1" locknut (found in the parts bag) and tighten the
locknut as much as possible while allowing the
A-frame and quadrant to pivot.
3. Move the snowplow into a normal operating
position.
Lit. No. 52308, Rev. 06
INSTALLATION INSTRUCTIONS
1" x 9"
Pivot Bolt
1" Locknut
(in parts bag)
4. Remove the protective packaging from the angle
rams.
5. Align the holes in the rod end of the angle ram
with the corresponding holes on the back of the
quadrant.
6. Install a 1" x 4" clevis pin (from the shipping
bracket) from the top down to attach each rod.
Secure the clevis pins with 1/4" x 1-1/2" cotter pins
from the parts bag.
1" x 4" Clevis Pins
1/4" x 1-1/2"
Cotter Pin
7
May 1, 2021