Asus WL 320gE - Wireless Access Point 빠른 시작 매뉴얼 - 페이지 16

{카테고리_이름} Asus WL 320gE - Wireless Access Point에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus WL 320gE - Wireless Access Point 20 페이지.

WL-320gE Access Point Quick Start Guide

Connect to APs in Remote Bridge List (Yes/No)

Select Yes to connect to access points in the remote bridge list.

Allow anonymous? (Yes/No)

Select Yes to allow users without accounts to connect. 2) Client Mode (Station)

Note: If "Connect to APs in Remote Bridge List" and "Allow Anonymous" are both set

to "No", it means that this AP will not connect with other APs and therefore the AP

mode setting will return to "AP Only".

2) Client Mode (Station)

Wireless client(Station) mode allows WL-320gE works as performance wireless client card as

long as the device supports wired connection(with Ethernet port), like Game console, PC or NB.

You need to set up the wireless setting and encryption before association.

Specify the SSID and Encryption of target AP accordingly under Wireless - Interface sub

menu then click Finish button to Save and Restore setting. After system restarting, connect

the Ethernet cable to WL-320gE ETHERNET port and other device, then WL-320gE will work

as wireless client card.

3) Repeater Mode (URE)

Wireless Repeater Mode allows WL-320gE works as range extender. You can set up the

wireless setting under Wireless-Interface sub menu(same as Client Mode) the same as root

AP then the wireless coverage can be boost.

9) Wireless

1) Site Survey(AP SCAN)

Site Survey will help WL-320gE associate appropriate AP while in Station (Client) or

URE(Repeater) mode. Make sure WL-320gE in Client or URE mode, click "AP SCAN" button

in Wireless -> Interface will pop up a window. AP Scan will collect complete AP around

information including MAC, SSID, Security, Channel and RSSI(AP wireless signal strength)

value.