Baumer HUBNER TDPZ 0,2 Series 설치 및 작동 지침 - 페이지 30
{카테고리_이름} Baumer HUBNER TDPZ 0,2 Series에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HUBNER TDPZ 0,2 Series 32 페이지. Tachogenerator (doppel-tachogenerator), tachogenerator (twin tachogenerator)
Baumer HUBNER TDPZ 0,2 Series에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (32 페이지), 설치 및 운영 지침 매뉴얼 (28 페이지), 설치 및 작동 지침 (28 페이지), 설치 및 작동 지침 (32 페이지), 설치 및 작동 지침 (32 페이지), 설치 및 작동 지침 (28 페이지)
페이지 인쇄
10
Technical data
10
Technical data
10.1
Technical data - electrical ratings
• Interference immunity:
• Emitted interference:
• Approval:
10.2
Technical data - electrical ratings (tachogenerator)
• Reversal tolerance:
• Linearity tolerance:
• Temperature coefficient:
• Isolation class:
• Calibration tolerance:
• Climatic test:
TDP 0,2 + ESL 90, TDP 0,2 + ESL 93
• Performance:
• Armature-circuit time-constant (τ
• Open-circuit voltage:
TDPZ 0,2 + ESL 90, TDPZ 0,2 + ESL 93
• Performance:
• Armature-circuit time-constant (τ
• Open-circuit voltage:
10.3
Technical data - electrical ratings (speed switches)
• Switching accuracy:
• Switching hysteresis:
• Switching delay time:
TDP 0,2 + ESL 90, TDP 0,2 + ESL 93
• Switching outputs:
• Output switching capacity:
• Minimum switching current:
TDPZ 0,2 + ESL 90, TDPZ 0,2 + ESL 93
• Voltage supply:
• Consumption w/o load:
• Switching outputs:
• Current each output:
10.4
Technical data - mechanical design
• Size (flange):
• Shaft type:
• Admitted shaft load:
• Flange:
• Protection DIN EN 60529:
• Speed (n):
• Range of switching speed (ns ):
• Torque:
• Materials:
27
EN 61000-6-2
EN 61000-6-3
CE
≤0.1 %
≤0.15 %
±0.05 %/K
B
±1 %
Humid heat, constant (IEC 60068-2-3, Ca)
12 W (speed >3000 rpm)
):
<75 µs
A
10...150 mV per rpm
2x 3 W (speed >3000 rpm)
):
<40 µs
A
20...100 mV per rpm
±4 % (≤1500 rpm)
±2 % (>1500 rpm)
≤30 % of switching speed
≤40 ms
1 output, speed control
≤6 A / 250 VAC
≤1 A / 48 VDC
100 mA
12 VDC ±10 %
≤5 mA
3 outputs, speed control
40 mA (DC)
ø115 mm
ø11 mm solid shaft
≤60 N axial, ≤80 N radial
EURO flange B10
IP55
≤6000 rpm (with ESL 90)
≤5000 rpm (with ESL 93)
650...6000 rpm (with ESL 90) (as ordered)
200...5000 rpm (with ESL 93) (as ordered)
1.5 Ncm
Housing: aluminium die-cast; Shaft: stainless steel
Baumer_TDP02-ESL-TDPZ02-ESL_II_DE-EN (20A1)
MB079.2 - 11115290