Baumer HUBNER TDPZ 0,2 Series Montaj ve Kullanım Talimatları - Sayfa 30

Taşınabilir Jeneratör Baumer HUBNER TDPZ 0,2 Series için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları indirin. Baumer HUBNER TDPZ 0,2 Series 32 sayfaları. Tachogenerator (doppel-tachogenerator), tachogenerator (twin tachogenerator)
Ayrıca Baumer HUBNER TDPZ 0,2 Series için: Kurulum ve Kullanım Talimatları Kılavuzu (32 sayfalar), Kurulum ve Kullanım Talimatları Kılavuzu (28 sayfalar), Montaj ve Kullanım Talimatı (28 sayfalar), Montaj ve Kullanım Talimatları (32 sayfalar), Montaj ve Kullanım Talimatları (32 sayfalar), Montaj ve Kullanım Talimatları (28 sayfalar)

Sayfayı Yazdır
Baumer HUBNER TDPZ 0,2 Series Montaj ve Kullanım Talimatları
10

Technical data

10
Technical data
10.1

Technical data - electrical ratings

• Interference immunity:
• Emitted interference:
• Approval:
10.2

Technical data - electrical ratings (tachogenerator)

• Reversal tolerance:
• Linearity tolerance:
• Temperature coefficient:
• Isolation class:
• Calibration tolerance:
• Climatic test:
TDP 0,2 + ESL 90, TDP 0,2 + ESL 93
• Performance:
• Armature-circuit time-constant (τ
• Open-circuit voltage:
TDPZ 0,2 + ESL 90, TDPZ 0,2 + ESL 93
• Performance:
• Armature-circuit time-constant (τ
• Open-circuit voltage:
10.3

Technical data - electrical ratings (speed switches)

• Switching accuracy:
• Switching hysteresis:
• Switching delay time:
TDP 0,2 + ESL 90, TDP 0,2 + ESL 93
• Switching outputs:
• Output switching capacity:
• Minimum switching current:
TDPZ 0,2 + ESL 90, TDPZ 0,2 + ESL 93
• Voltage supply:
• Consumption w/o load:
• Switching outputs:
• Current each output:
10.4

Technical data - mechanical design

• Size (flange):
• Shaft type:
• Admitted shaft load:
• Flange:
• Protection DIN EN 60529:
• Speed (n):
• Range of switching speed (ns ):
• Torque:
• Materials:
27
EN 61000-6-2
EN 61000-6-3
CE
≤0.1 %
≤0.15 %
±0.05 %/K
B
±1 %
Humid heat, constant (IEC 60068-2-3, Ca)
12 W (speed >3000 rpm)
):
<75 µs
A
10...150 mV per rpm
2x 3 W (speed >3000 rpm)
):
<40 µs
A
20...100 mV per rpm
±4 % (≤1500 rpm)
±2 % (>1500 rpm)
≤30 % of switching speed
≤40 ms
1 output, speed control
≤6 A / 250 VAC
≤1 A / 48 VDC
100 mA
12 VDC ±10 %
≤5 mA
3 outputs, speed control
40 mA (DC)
ø115 mm
ø11 mm solid shaft
≤60 N axial, ≤80 N radial
EURO flange B10
IP55
≤6000 rpm (with ESL 90)
≤5000 rpm (with ESL 93)
650...6000 rpm (with ESL 90) (as ordered)
200...5000 rpm (with ESL 93) (as ordered)
1.5 Ncm
Housing: aluminium die-cast; Shaft: stainless steel
Baumer_TDP02-ESL-TDPZ02-ESL_II_DE-EN (20A1)
MB079.2 - 11115290