ComAp InteliCharger 240 24 참조 매뉴얼 - 페이지 9
{카테고리_이름} ComAp InteliCharger 240 24에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ComAp InteliCharger 240 24 17 페이지. Inovative advanced battery charger
페이지 인쇄
4 Charger setup and operation
4.1 Front panel description
4.2 Detailed description
AC input terminal
Use 3 wires connection (L - phase, N - neutral, PE - protective earth) according to description in chapter
input wiring diagram (page
Charging current level
Using this adjusting element it is possible to set max. charging current for battery. The current adjustment goes
from 20–100 % of charger nominal current I
battery capacity (in Ah).
Battery output terminal
Connect the battery between pin 1 (- polarity) and pin 2 (+ polarity).
use two batteries (12 V) for 24 V charger output
InteliCharger 240 24 Reference Guide
7).
. Set the maximum charging current (in A) as 20–100 % of the
n
AC input terminal
Maximum charging current adjustment
Battery output terminal
Mains fail signal output terminal
Battery or charge fail signal output
terminal
Mains fail indicator
Battery or charge fail indicator
Diagnostic indicator
Battery type selector
Boost charge selector
Life Test function selector
AC
9