Baumer KTD 2-A 4 L Series 설치 및 운영 지침 매뉴얼 - 페이지 11

{카테고리_이름} Baumer KTD 2-A 4 L Series에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer KTD 2-A 4 L Series 17 페이지. Tachogenerators 1-piece

Mechanical Mounting

5.1. Preparations

• Attention! Observe the safety instructions in chapter 4.

• Make sure the drive will not be operational for the time of tachogenerator

installation.

• Prior to any installation work, switch off overall voltage supply and ensure

machinery is idle..

• For tachogenerator type identification see product label.

5.2. Installation

• Make sure the necessary preparations for installation according to

chapter 5.1. are present.

5.2.1. Shaft designs: KTD 2-... B14 ...

• Avoid a rigid connection between tachogenerator and drive shaft.

• Connect drive and tachogenerator shaft using a suitable coupling.

The tachogenerator must be mounted on the drive with the least possible angular

error and parallel misalignment.

• For suitable connections, see accessories.

• Ensure correct installation without hampering operation.

• Objects in the near vicinity must be kept at a sufficient distance from the

coupling.

flexible,

torsionally rigid

coupling CPS...

Baumer_KTD2A4L-KTD2B14_OI_DE-EN_1607.indd

fixings

screws

