Baumer KTD 2-A 4 L Series 설치 및 운영 지침 매뉴얼 - 페이지 13

{카테고리_이름} Baumer KTD 2-A 4 L Series에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer KTD 2-A 4 L Series 17 페이지. Tachogenerators 1-piece

Electrical connection

6.1. Safety instructions for electrical connection

• Warning! Observe the additional safety precautions in chapter 4.

• Warning! Danger of electric shock!

Make sure tachogenerator is not live for the time of electrical commissio-

ning!

Switch off power supply of any equipment involved!

Ensure proper grounding!!

6.2. Electrical commissioning

• Remove housing.

• Insert the connecting cable into gland M8.

• Connect protective earth to terminal M4-PE (ground) .

• Execute cable terminal assignment.

• Red = + (positive polarity);

Blue = - (negative polarity)

with clockwise rotation.

• Tighten the cable gland.

Note: Only use cables

recommended by Baumer..

Important: Keep inside cabling

as short as possible but without

strain. Any wires touching the

rotor will cause device malfunction.

7. Maintenance, repair & disposal

• Any repair work of the tachogenerator by the manufacturer only.

• Dispose of all integrated components in compliance with the country-specific

provisions.

Baumer_KTD2A4L-KTD2B14_OI_DE-EN_1607.indd

max. 1.2 Nm

rotation direction of the shaft

tacho-

generator

- (blue)

+ (red)

connection

motor

