Advanced MxPro 5 매뉴얼 - 페이지 9

{카테고리_이름} Advanced MxPro 5에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Advanced MxPro 5 14 페이지. Pager interface
Advanced MxPro 5에 대해서도 마찬가지입니다: 매뉴얼 (10 페이지), 애플리케이션 노트 (10 페이지)

페이지 인쇄
Advanced MxPro 5 매뉴얼

2.2 Pager Interface Communications Settings

The serial interface can be configured to the settings of the pager system. Refer to the pager system
documentation for further details on the settings required.
The table below shows the options available.
Item
Default
Baud Rate
4800
Data Bits
8
Stop Bits
1
Parity
None
CTS
Disabled

2.3 Pager Events

In the pager events option, it is possible to determine
to which pagers each type of event should be sent
and to configure some basic event parameters.
The active window shows and event tree with all of
the possible event types.
To configure an event type, click on the + symbol to
expand the tree.
The Basic options are described in the table below.
Right click on the item to edit its setting.
Item
Default
Flag
Fire = Alarm
Alarm, Plant
Alarm, Pre-
Alarm and
Fault = High
Disable and
Enable =
Normal
Beep
1
Code
Text
Fire
Alarm
Plant Alarm
Pre-Alarm
Fault
Disable
Enable
www.acornfiresecurity.com
Options
600, 1200, 2400,
4800, 9600, 19200,
38400 and 57600
7, 8
1, 2
None, Odd, Even
Disabled, Enabled,
Switched
Options
Alarm
High
Normal
0 – 9 Refer to the
pager documentation
to see if it supports
this option.
Up to 16 characters
– this text is used in
the "Event Text"
string – see the
section on Text Cuts.
www.acornfiresecurity.com
There can be up to 8 shifts per day for
both weekdays and for weekend days.
Shifts that are not configured are crossed
out.
9