Amphenol RESMLAC 28 MG 설치 매뉴얼 - 페이지 9

{카테고리_이름} Amphenol RESMLAC 28 MG에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amphenol RESMLAC 28 MG 15 페이지. Ip67 rugged ethernet managed switch
Amphenol RESMLAC 28 MG에 대해서도 마찬가지입니다: 설치 매뉴얼 (15 페이지)

페이지 인쇄
Amphenol RESMLAC 28 MG 설치 매뉴얼
DB9 plug
wiring
SCE to DB9
cordset
Suggested
cordset
Cordset Wiring
FIBER OPTIC
wiring
TVOP
connection
TVOP07 wiring
TVOP plug
part number
RESMLAC 28MG IG rev. 1.3
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
These switches can be accessed with a serial connection.
The serial port is available only on port 1, shared with LAN1.
To access the switch using a serial link, we suggest
preparing a cordset SCE to DB9.
The DB9 shall be female connector.
Use a latch inline receptacle for the SCE connector.
P/N : SCE2-B-L1K07-14PN.
This plug has size 7. It is coming with 14 contacts 23 AWG
with solder termination. Only contacts M, N and P should
be connected following to enclosed wiring.
Connector SCE2
SCE2
RS232 Signal type
M
N
P
These switches can be equipped with up to 4 fiber optic ports.
The model RESMLAC 28MG 4M TVOP 10G DC comes
with 4 fiber optics ports.
The connectors installed onto the switch are jam nut
receptacles :
P/N: TVOP 07 W N0 11 2 P7 N
TVOP 07
1
2
The mating cable assembly shall use at least a multimode 50/125 OM3 fiber type.
It shall use a suitable plug compliant with the TVOP receptacle:
P/N : TVOP 06 W xx 11 2 P7 N xx
Tx
Rx
GND
Signal
Tx
Rx
Page 9 of 15
SCE2-B-LIK07-14PN
pinout
- Rear view -
Connector DB-9
DB-9
RS232 Signal type
2
Rx
3
Tx
5
GND
TVOP 07 pinout
- Rear view -
Last Rev: 1-Feb-21