Amphenol RESMLAC 28 MG Manual de instalação - Página 9
Procurar online ou descarregar pdf Manual de instalação para Interruptor Amphenol RESMLAC 28 MG. Amphenol RESMLAC 28 MG 15 páginas. Ip67 rugged ethernet managed switch
Também para Amphenol RESMLAC 28 MG: Manual de instalação (15 páginas)
Imprimir página
DB9 plug
wiring
SCE to DB9
cordset
Suggested
cordset
Cordset Wiring
FIBER OPTIC
wiring
TVOP
connection
TVOP07 wiring
TVOP plug
part number
RESMLAC 28MG IG rev. 1.3
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
These switches can be accessed with a serial connection.
The serial port is available only on port 1, shared with LAN1.
To access the switch using a serial link, we suggest
preparing a cordset SCE to DB9.
The DB9 shall be female connector.
Use a latch inline receptacle for the SCE connector.
P/N : SCE2-B-L1K07-14PN.
This plug has size 7. It is coming with 14 contacts 23 AWG
with solder termination. Only contacts M, N and P should
be connected following to enclosed wiring.
Connector SCE2
SCE2
RS232 Signal type
M
N
P
These switches can be equipped with up to 4 fiber optic ports.
The model RESMLAC 28MG 4M TVOP 10G DC comes
with 4 fiber optics ports.
The connectors installed onto the switch are jam nut
receptacles :
P/N: TVOP 07 W N0 11 2 P7 N
TVOP 07
1
2
The mating cable assembly shall use at least a multimode 50/125 OM3 fiber type.
It shall use a suitable plug compliant with the TVOP receptacle:
P/N : TVOP 06 W xx 11 2 P7 N xx
Tx
Rx
GND
Signal
Tx
Rx
Page 9 of 15
SCE2-B-LIK07-14PN
pinout
- Rear view -
Connector DB-9
DB-9
RS232 Signal type
2
Rx
3
Tx
5
GND
TVOP 07 pinout
- Rear view -
Last Rev: 1-Feb-21