Dahua VTO5110B 사용자 설명서 - 페이지 10

{카테고리_이름} Dahua VTO5110B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua VTO5110B 15 페이지. Fast operation of analogue villa system
Dahua VTO5110B에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (5 페이지)

페이지 인쇄
Dahua VTO5110B 사용자 설명서

3 Basic Function Introduction

3.1 Call User

3.1.1 Connect

VTO is connected to VTH via network connection. At VTO, You can touch the button
to call all VTHs of designated user. During connecting, you can touch the button on VTO
to end call at any time.

3.1.2 Call

Under connecting status, if the call is picked up by any VTH, other VTHs will enter
standby status (These VTHs may join call by pressing call button, or enter monitoring
status by pressing monitor button.), and you will enter calling status. Each VTH that joins
the call may end call independently from other VTHs.

3.2 Monitor

Video captured by this VTO can be viewed from multiple VTHs.

3.3 Issue Card/Delete Card

3.3.1 Issue Card

Press menu button on VTH to issue card. Press SOS button to switch menu and
select to issue card. VTH will then enter issuing card mode, and you will see prompt
saying issuing card on screen. Now swipe card at card reading area until you hear a beep
which means you have successfully issued card. Press touch button on VTO to exit.

3.3.2 Delete Card

Press menu button on VTH to enter deleting menu. Press SOS button to switch menu
and select to delete card. You shall confirm deletion by pressing call button. After deletion
completes, you will see prompt saying delete card successfully.