Dahua VTO5110B User Manual - Page 10

Browse online or download pdf User Manual for Intercom System Dahua VTO5110B. Dahua VTO5110B 15 pages. Fast operation of analogue villa system
Also for Dahua VTO5110B: Quick Start Manual (5 pages)

Print Page
Dahua VTO5110B User Manual

3 Basic Function Introduction

3.1 Call User

3.1.1 Connect

VTO is connected to VTH via network connection. At VTO, You can touch the button
to call all VTHs of designated user. During connecting, you can touch the button on VTO
to end call at any time.

3.1.2 Call

Under connecting status, if the call is picked up by any VTH, other VTHs will enter
standby status (These VTHs may join call by pressing call button, or enter monitoring
status by pressing monitor button.), and you will enter calling status. Each VTH that joins
the call may end call independently from other VTHs.

3.2 Monitor

Video captured by this VTO can be viewed from multiple VTHs.

3.3 Issue Card/Delete Card

3.3.1 Issue Card

Press menu button on VTH to issue card. Press SOS button to switch menu and
select to issue card. VTH will then enter issuing card mode, and you will see prompt
saying issuing card on screen. Now swipe card at card reading area until you hear a beep
which means you have successfully issued card. Press touch button on VTO to exit.

3.3.2 Delete Card

Press menu button on VTH to enter deleting menu. Press SOS button to switch menu
and select to delete card. You shall confirm deletion by pressing call button. After deletion
completes, you will see prompt saying delete card successfully.